SATO s86ex - Downloading the Emulation Module

5 Emulation Mode
226
S84-ex/S86-ex Operator Manual
5.1.3 Downloading the Emulation Module
In the emulation module loader, user can download the emulation module. A total of four emulation
modules can be downloaded to the printer memory.
The flowchart shows the sequence of the setting screens for loading the emulation module. The table
describes each setting screen in detail.
CAUTION
Be sure to perform a virus check for the USB memory or SD card before connecting it to the printer. SATO
Corporation shall not be held responsible for a malfunction of the printer caused by a virus infection through
the USB memory or SD card.
Download
completed?
Yes
No
3 short beeps
when the
download is
completed.
Select DOWNLOAD
+ button
Select SD CARD or USB MEMORY + button
button
'(/(7(
02'8/(6(77,1*
/2$'
'(/(7(
02'8/(6(77,1*
6'&$5'
86%0(025<
,17(5)$&(6(/(&7
,17(5)$&(
6'&$5'
,17(5)$&(6(/(&7
02'8/('2:1/2$'
&203/(7('
button
'2:1/2$'
'2:1/2$'5($'<
Select INTERFACE
+ button
02'8/('2:1/2$'
&203/(7('
3 short beeps when the
download is completed.