SATO s86ex - Adjusting the Print Quality; Adjustment of the Print Darkness

6 Cleaning and Performing Printer Adjustments
252
S84-ex/S86-ex Operator Manual
6.4 Adjusting the Print Quality
You can adjust the print quality by adjusting the print darkness and print speed.
6.4.1 Adjustment of the Print Darkness
The adjustment procedure for the print darkness is as follows:
Note
You can fine tune the print darkness by setting the DARKNESS in the adjustments mode. Refer to Section
4.2.5 Adjustment Mode for details.
1 When the printer is in online mode, press
the LINE button to change the printer
to offline mode.
2 Press the ENTER button.
The printer changes to setting mode menu.
3 Select the USER MODE using the
/// buttons.
USER MODE shows on the screen and the icon is
highlighted in reverse.
4 Press the ENTER button to enter the
user mode.
OFFSET VOLUME shows on the screen.
Note
If password function is enabled, PASSWORD is shown
on the screen instead. In this case, enter the password
first.