5 Emulation Mode
225
S84-ex/S86-ex Operator Manual
ALL MODULE DELETING...
The printer is deleting the selected emulation module.
The bar on the lower portion of the screen indicates the module deletion
progress.
If ALL is selected in the previous screen, ALL MODULE is shown.
Otherwise, the screen shows the selected emulation module name.
For example, SZPL(XX.XXX) or SDPL(XX.XXX). The XX.XXX is the
module version information.
MODULE DELETE COMPLETED
This screen shows the completion of deleting the selected emulation
module and three beeps will sound.
If there is emulation module in the printer memory, the printer shows the
MODULE DELETE menu.
If all the emulation module has been deleted, the printer shows the
MODULE SETTING menu.
To Next Page
Loading...
