SATO s86ex - Page 296

8 Appendix
294
S84-ex/S86-ex Operator Manual
Bluetooth
Authentication Level NONE Yes Yes
PIN CODE 0000000000000000 Yes Yes
DEVICE NAME SATO_PRINTER Yes Yes
DISCOVERY SETTING ENABLE Yes Yes
PARAMETER SETTING(ISI) 0800 Yes Yes
PARAMETER SETTING(ISW) 0012 Yes Yes
PARAMETER SETTING(PSI) 0800 Yes Yes
PARAMETER SETTING(PSW) 0012 Yes Yes
PROTOCOL STATUS4 Yes Yes
CRC CHECK DISABLE Yes Yes
IGNORE CR/LF NO Yes Yes
IGNORE CAN/DLE NO (When STATUS4, MULTI is
selected in IEEE1284)
Yes Yes
SNTP FUNCTION DISABLE Yes No
IPv4/6 select IPv4 Yes No
NTP IPv4 ADDRESS
NTP IPv6 ADDRESS
IPv4: 000.000.000.000
IPv6: 0000:0000:0000:0000:
0000:0000:0000:0000
Yes No
TIME ZONE 00:00 Yes No
ERROR NOTICE DISABLE Yes No
SNMP FUNCTION DISABLE Yes No
SNMP SETTING
COMMUNITY NAME SNMP v1/v2c[1] : public
SNMP v1/v2c[2] : NULL
No No
COMMUNITY WRITE DISABLE No No
USER NAME Null No No
AUTH PROTOCOL NONE No No
AUTH KEY Null No No
PRIVACY PROTOCOL NONE No No
PRIVACY KEY Null No No
USER MIB WRITE DISABLE No No
TRAP SET
TRAP TYPE SELECT SNMPv2c No No
TRAP DISABLE No No
COMMUNITY NAME Null No No
Setting Item Initial Value
Default
(User)
Default
(Shipping)