SATO s86ex - Page 295

8 Appendix
293
S84-ex/S86-ex Operator Manual
WLAN
DHCP SETTING DISABLE Yes No
IPv4 ADDRESS 192.168.001.001 Yes No
IPv4 SUBNET MASK 255.255.255.000 Yes No
IPv4 GATEWAY ADR 192.168.001.002 Yes No
WIRELESS MODE Ad Hoc Yes No
SSID SATO_PRINTER Yes No
CHANNEL 06 Yes No
PROTOCOL STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
STATUS REPLY TIMING ENQ (When STATUS4 is selected) Yes Yes
IEEE1284
PROTOCOL STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
RECEIVE BUFFER 1ITEM (When STATUS4 is selected) Yes Yes
IEEE1284 ACK SIGNAL 00.5us (When 1ITEM is selected) Yes Yes
RS-232C
BAUDRATE 19200 Yes Yes
PARITY BIT NONE Yes Yes
STOP BIT 1 BIT Yes Yes
CHARACTER BIT 8 BIT Yes Yes
PROTOCOL STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
RECEIVE BUFFER 1ITEM (When READY/BUSY, XON/
XOFF is selected)
Yes Yes
USB
Protocol STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)