SATO s86ex - Page 278

7 Troubleshooting
276
S84-ex/S86-ex Operator Manual
22
Calendar error
Lights red.
One long beep.
To clear the error:
Power off the printer.
The date and time of the
calendar are incorrect or
the calendar IC is not
installed.
Check if you have
installed the calendar IC
or replace the calendar
PCB.
23
RFID tag error
*1
or
*1
Flashes red.
Three short beeps.
To clear the error:
Auto recovery or
cancel the job.
(Press the
CANCEL button
or send the CAN
command.)
*
1
The second
screen will be
switched by EXT
signal setting.
Could not read/write to
the RFID inlay.
Discard this tag.
23
RFID tag error
Flashes red.
Three short beeps.
To clear the error:
Press the LINE
or FEED button.
Press the
CANCEL button
or send the CAN
command to cancel
the job.
The number of failed
RFID writes exceeded the
specified MAX ERR
COUNT.
Discard this tag.
Error
No. Message LED/Buzzer Cause Countermeasure