SATO s86ex - Page 280

7 Troubleshooting
278
S84-ex/S86-ex Operator Manual
40
Cover open error
Flashes red.
Three short beeps.
To clear the error:
Close the cover.
The cover is opened. Close the cover.
The sensor for sensing
the open/close status of
the cover is defective.
Replace the sensor for
sensing the open/close
status of the cover.
41
Saver error
Lights red.
One long beep.
To clear the error:
Power off the printer.
The print head cannot
stop at the specified
position.
Adjust the saver head
position.
Replace the saver sensor.
Replace the saver motor
and motor driver PCB.
Replace the saver cam.
42
Sensor cover open
error
Flashes red.
Three short beeps.
To clear the error:
Close the sensor
cover.
The sensor cover is
unlocked.
Lock the sensor cover.
The sensor for sensing
the open/close status of
the sensor cover is
defective.
Replace the sensor for
sensing the open/close
status of the sensor cover.
Error
No. Message LED/Buzzer Cause Countermeasure
40
40
41
41
42
42