Scania DC11 - Page 106

106
©
Scania CV AB 2011, Sweden
01:03-02
Measurements
Main bearing races
Standard, diameter 107.978-108.000 mm
Undersize 1, diameter 107.728-107.750 mm
Undersize 2, diameter 107.428-107.500 mm
Undersize 3, diameter 107.228-107.250 mm
Undersize 4, diameter 106.978-107.000 mm
Fillet radius 4.75-4.85 mm
Surface quality 0.25 Ra
Connecting rod races
Standard, diameter 86.978-87.000 mm
Undersize 1, diameter 86.728-86.750 mm
Undersize 2, diameter 86.478-86.500 mm
Undersize 3, diameter 86.228-86.250 mm
Undersize 4, diameter 85.978-86.000 mm
Fillet radius 4.8-5.2 mm
Surface quality 0.25 Ra
Width, max. 56.05
Radial clearance 0.051-0.114 mm
Thrust washers
Standard, thickness 3.370-3.430 mm
Oversize 1, thickness 3.450-3.510 mm
Oversize 2, thickness 3.500-3.560 mm
Oversize 3, thickness 3.630-3.690 mm
Oversize 4, thickness 3.880-3.940 mm
Axial clearance 0.138-0.380 mm
Crankshaft
www.motodiesel.ir
MASHINESOFT.COM
09120146259