Scania DC11 - Support Bearing

01:03-02
©
Scania CV AB 2011, Sweden
101
Support bearing
Renewal
Special tools
1 Remove the retaining rings on both sides of
the support bearing.
2 Knock out the support bearing from the
flywheel using drift 99 250.
3 Fit the inner retaining ring and fit the new
support bearing with drift 99 250.
4 Fit the outer retaining ring.
Number Denomination Illustration Tool board
99 250 Drift D3,C4
99 250
112 640
99 250
01_1392
Flywheel
www.motodiesel.ir
MASHINESOFT.COM
09120146259