Scania DC11 - Renewing the Valve Guides

48
©
Scania CV AB 2011, Sweden
01:03-02
Renewing the valve guides
Special tools
1 Press out the valve guides using drift
99 383.
Number Denomination Illustration Tool board
99 382 Drift D1-C6
99 383 Drift D1-B1
99 382
110 864
99 383
110 865
2 Press in the new valve guides using drift
99
382. Press the guide down as far as the
drift allows, i.e. until it makes contact with
the spring seat in the cylinder head.
Cylinder head
www.motodiesel.ir
MASHINESOFT.COM
09120146259