Scania DC11 - Renewing the Valve Stem Seal

40
©
Scania CV AB 2011, Sweden
01:03-02
Renewing the valve stem seal
Special tools
1 Remove the valve.
2 Remove the valve stem seal with a pair of
pliers.
Number Denomination Illustration Tool board
99 323 Drift D5
100334
99 323
01_1348
3 Fit the valve.
4 Tap in a new valve stem seal carefully using
tool 99 323 and a hammer.
01_1349
99 323
Cylinder head
www.motodiesel.ir
MASHINESOFT.COM
09120146259