32
©
Scania CV AB 2011, Sweden
01:03-02
Fitting the cylinder head
Specifications
Tightening torques (applies both to engines with injection pump and
unit injector)
Cylinder head bolts:
- First tightening 60 Nm
- Second tightening 150 Nm
- Third tightening 250 Nm
- Fourth tightening 90°
Bolt for lower rocker cover 26 Nm
Bolt for shaft with rocker arms 105 Nm
Bolt for support bracket 40 Nm + 60°
Tightening torques (applies to engines with injection pump)
Nut for injector 70 Nm
Bolt for upper rocker cover 26 Nm
Nut for adjusting screw on rocker arm 35 Nm
Bolt for exhaust manifold 59 Nm
Bolt for pressure pipe 20 +/-5 Nm
Lubricant
Lubricant for exhaust pipe bolts and joints 561 205
Cylinder head
MASHINESOFT.COM
09120146259
To Next Page
Loading...
