Scania DC11 - Fitting the Crankshaft Gear

118
©
Scania CV AB 2011, Sweden
01:03-02
Fitting the crankshaft gear
1 Fit the crankshaft gear.
2 Fit the intermediate gear, refer to Fitting the
intermediate gear, steps 1-2.
3 Fit the flywheel housing according to the
section Fitting the flywheel housing.
4 Fit the flywheel according to the section
Fitting the flywheel.
01 1366
Timing gear
www.motodiesel.ir
MASHINESOFT.COM
09120146259