Scania DC11 - Bearing Bush in Connecting Rod

96
©
Scania CV AB 2011, Sweden
01:03-02
Bearing bush in connecting rod
Renewal
Special tools
Number Denomination Illustration
99 403 Tool for renewing bearing bush
99 403
115 527
1
2
3
Use tool 99 403 when renewing the bearing
bush.
The tool comprises three parts:
1. Pressplate with guide pin
2. Press drift
3. Supports
There are different supports, depending on the
engine type. The support marked D is for the
DC11 and DSC/DC12.
99 403
115 527
1
2
3
Crank mechanism
www.motodiesel.ir
MASHINESOFT.COM
09120146259