Scania DC11 - Oil Filter

01:03-02
©
Scania CV AB 2011, Sweden
127
Oil filter
Only use original Scania filters.
Tools
Only use original Scania filters and renew the
oil filter according to our inspection
instructions.
Use filter tongs 587 025 when removing the oil
filter.
Number Denomination Illustration Tool board
587 025 Filter tongs M1
Removing the oil filter
01_1389
587 025
IMPORTANT! When renewing the oil filter,
the oil filter unit should also be cleaned
according to our instructions.
If the oil filter unit is not cleaned, the oil filter
will clog quickly increasing the flow resistance.
If this happens, an overflow valve in the filter
retainer opens and lets the oil pass without being
filtered.
The oil lubricates and cools components such as
the turbocharger. The turbocharger rotates at
high speed, sometimes above 100,000
rpm. It is
vital that the lubrication functions properly.
There is no separate turbocharger filter; the oil
is cleaned by the engine oil filter. If the
turbocharger receives contaminated oil, the
bearings become severely worn.
Lubrication system
www.motodiesel.ir
MASHINESOFT.COM
09120146259