Scania DC11 - Removing the Flywheel Housing; Fitting the Flywheel Housing

72
©
Scania CV AB 2011, Sweden
01:03-02
Removing the flywheel housing
1 Remove the starter motor.
2 Detach and move the power steering
hydraulic pump to one side.
3 Remove the flywheel housing.
100025
Fitting the flywheel housing
Specifications
Tools
Tightening torques
Bolts for flywheel housing M10: 50 Nm
M12: 90 Nm
Sealant
Sealant for flywheel housing 816 064
Number Denomination Illustration Tool board
588 189 Air-operated spray gun - -
584 117 Adapter for cartridge - -
584 118 Nozzle - -
Flywheel housing
www.motodiesel.ir
MASHINESOFT.COM
09120146259