Schweitzer Engineering SEL-387-0 - SEL-387-0, -5, -6 Relay Settings Sheets

Date Code 20170601 Instruction Manual SEL-387-0, -5, -6 Relay
Date _______________ SET.1 of 35SEL-387-0, -5, -6 Relay Settings Sheets
Group Settings (SET Command)
SEL-387-0, -5, -6 Relay Settings Sheets
Group Settings (SET Command)
Configuration Settings
Relay Identifier (39 Characters)
RID =
Terminal Identifier (59 Characters)
TID =
Enable Winding 1 in Differential Element (Y, N, Y1)
E87W1 =
Enable Winding 2 in Differential Element (Y, N, Y1)
E87W2 =
Enable Winding 3 in Differential Element (Y, N, Y1)
E87W3 =
Enable Winding 4 in Differential Element (Y, N, Y1)
E87W4 =
Enable Winding 1 O/C Elements and Dmd Thresholds (Y, N)
EOC1 =
Enable Winding 2 O/C Elements and Dmd Thresholds (Y, N)
EOC2 =
Enable Winding 3 O/C Elements and Dmd Thresholds (Y, N)
EOC3 =
Enable Winding 4 O/C Elements and Dmd Thresholds (Y, N)
EOC4 =
Enable Combined O/C Elements (Y, N)
EOCC =
Enable Thermal Element (Y, N) (SEL-387-6 Relay only)
ETHER =
Enable RTDA Element (Y, N)
(SEL-387-5 and SEL-387-6 Relays only)
E49A =
Enable RTDB Element (Y, N)
(SEL-387-5 and SEL-387-6 Relays only)
E49B =
Enable SEL
OGIC
®
Control Equations Set 1 (Y, N) ESLS1 =
Enable SEL
OGIC Control Equations Set 2 (Y, N) ESLS2 =
Enable SEL
OGIC Control Equations Set 3 (Y, N) ESLS3 =
General Data
Winding 1 CT Connection (D, Y) W1CT =
Winding 2 CT Connection (D, Y)
W2CT =
Winding 3 CT Connection (D, Y)
W3CT =
Winding 4 CT Connection (D, Y)
W4CT =
Winding 1 CT Ratio (1–50000)
CTR1 =
Winding 2 CT Ratio (1–50000)
CTR2 =