3 Operation
3--17
F--9999--8 Build 8 Issue 1
DRIVE SPEED
Fig. 3-31. Adjust Drive Speed
Step: 9. Adjust drive speed to 7.
START
Fig. 3 -32. Start Pushbutton
Step: 10.Press START pushbutton.
PLASTIC
ADVANCE
Fig. 3-33. Plastic Advance Pushbutton
Step: 11. Press and hold PLASTIC ADVANCE
pushbutton till plastic enters the Tip Die.
STOP
Fig. 3 -34. Stop Drive Pushbutton
Step: 12.Press STOP pushbutton.
To Next Page
Loading...