10
CA Certificate: It is the root certificate. Click the Browse button to browse and add
the certificate.
User Certificate: It is the user certificate. Click the Browse button to browse and
add the certificate.
Private Key: It is the user’s private key. Click the Browse button to browse and add
the certificate.
Validity Period: It displays the effective period of the certificates.
Note:
Currently, only certificates in “.pem” format are supported, and the certificates must
be generated using the “DER encoded binary X.509” method.
The length of the certificate file name must not exceed 64 bytes, and the file size
must be less than 100 KB.
All the three certificates are required for authentication.
Users should select the right certificate file for each type of certificate.
3. Click the Connect button to connect the receiver to your network. The adapter will
connect to the wireless router (AP) in a few seconds.
Note:
The WLAN adapter will connect to your network when the receiver is in Wireless
Display Ready to Connect state.
The WLAN adapter may take some time to connect to your network, depending on
your network environment.
To Next Page
Loading...
