86
5. Measuring Light Sources [Measurement Screen]
2.
Touch the [Target] indication.
Target CCT Input screen will be displayed. (
P26)
Set the color temperature.
NOTE
If you are not using LB index/lter and CC index/lter values, you can omit this
step.
You cannot set the target color temperature in "Spectrum Comp.", "CRI", "CRI
Comp.", "SSI", "TLCI/TLMF" and "Multi Lights" Modes.
NOTE
If necessary, you can select a previously created Preset value from Preset
Selection in the Tool Box. (
P155)
If no presets have been created, the Preset Selection will be grayed out and
touching the button will not display the Preset Selection Display.
You can omit this step if unnecessary.
Measuring Screen Target CCT Input Screen
Tool Box Screen Preset Selection Screen Tool Box Screen
The selected value is indicated
by the blue background.
The set content is displayed in
yellow letter at the lower right
hand corner of the button.
To Next Page
Loading...
