Sensus SensusRF - Page 100

99
SensusRF gateway user manual
| 29/10/2019
17.2.11.1 Request
REQUEST
TAG DESCRIPTION
Scheme https://<GATEWAY IP>/api/oms/all
HTTP Method GET
Parameters Authorization with JWT
Example:
GET /api/oms/all HTTP/1.1
Authorization: eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJhcGlfdmVyc2lvbiI6IjEuMCIsInNlc3Npb25faWQiOi
JDNzY2MTMwMTBGNjc4NjA5IiwidXNlciI6ImFkbWluIiwibG9nZ2VkIjoidHJ1ZSIsIm1hYyI6IjFDOkJBOjhDOkEyO
kEzOjAyIiwibWFudWZhY3RvciI6IkNBUyBURUNOT0xPR0lBIiwiZXhwaXJhdGlvbl9kYXRlIjoxNTY2NDk1NTIyfQ.3
zcy7tIxe7otsjzUsLNy5ePAtE_oh26U5WIIqAnU4Hw
Host: 192.168.7.2
17.2.11.2 Response
RESPONSE
TAG DESCRIPTION
api_version The version of the GATEWAY REST API
request_status The status of the request
payload The payload of the requested information
oms_endpoints List of last reading data from each OMS meter
device_id OMS meter serial number
datetime OMS meter date and Time (yyyy-MM-dd hh:mm:ss)
signal OMS meter signal level
last_packet OMS meter last reading (raw/encrypted telegram)
Example:
HTTP/1.1 200 OK
X-Powered-By: CAS_GATEWAY