Sensus SensusRF User Manual

46
SensusRF gateway user manual
| 29/10/2019
• {csv|zip}: csv will be used for not compressed files and zip will be used for compressed files.
The content of decrypted readings files requested via the web interface or delivered by email/FTP is the
same.
The SensusRF decrypted readings file is composed of the following fields:
• METER_ADDRESS
• READING_DATE
• READING_VALUE_L
• LOW_BATTERY_ALR
• LEAK_ALR
• MAGNETIC_TAMPER_ALR
• METER_ERROR_ALR
• BACK_FLOW_ALR
• BROKEN_PIPE_ALR
• EMPTY_PIPE_ALR
• SPECIFIC_ERROR_ALR
The OMS decrypted readings file is composed of the following fields:
• METER_ADDRESS
• READING_DATE
• READING_VALUE
• VIB_READING_VALUE
• FLOW_RATE_VALUE
• VIB_FLOW_RATE_VALUE
• APP_BUSY_ALR
• ANY_APP_ERROR_ALR
• ABNORMAL_CONDITION_ALR
• LOW_POWER_BATERY_ALR
• PERMANET_ERROR_ALR
• TEMPORARY_ERROR_ALR
• SPECIFIC_ERROR_1_ALR
• SPECIFIC_ERROR_2_ALR
• SPECIFIC_ERROR_3_ALR
For both files, when an alarm field has 0, it means that this alarm is inactive. When it has 1 on it, alarm is
active.
The two files with readings that couldn´t be decrypted have the same layout and they are composed by the
following fields:
• METER_ADDRESS
• READING_DATE
• RAW_TELEGRAM
11.2.7 Routes
On the Routes option are recorded all the activation routes for repeaters present in network.

Sensus SensusRF Specifications

General

Brand	Sensus
Model	SensusRF
Category	Gateway
Language	English