Need help?Do you have a question about the Sensus SensusRF and is the answer not in the manual?
Lists the components included in the SensusRF Gateway package.
Specifies the AC input voltage, frequency, output voltage, and current for the gateway.
Describes the option to power the gateway using a DC source, like a solar panel.
Explains the location and usage of the SIM card slots on the gateway.
Lists the physical dimensions and environmental operating conditions for the gateway enclosure.
Guides through installing necessary drivers to connect the gateway to a PC.
Details the different user roles (Administrator, Auditor, Viewer) and their permissions.
Describes the initial dashboard showing task, connection, and sensor statuses.
Explains the various tasks running on the gateway and their status indicators.
Guides through configuring GPRS settings like APN, username, and password.
Explains how to configure Ethernet settings, including DHCP options.
Details how to configure DNS server settings for network resolution.
Specifies settings for connecting the gateway to an IRIS Server.
Outlines parameters for Iris Light mode, including upload options.
Configures scheduled tasks for meter reading collection and delivery.
Configures alarm notifications for various gateway events and conditions.
Sets the gateway's operating mode between Normal and Transparent.
Configures which protocols and antennas are active for SensusRF and OMS.
Accesses various gateway settings like installation, restart, and password.
Guides on resetting the gateway to its default factory state.
Guides on upgrading the gateway's firmware using files from a PC.
Explains how to configure the gateway as a VPN client.
Configures firewall rules to control access to gateway services.
Details configuring client certificates for two-factor authentication.
Initiates a session with the gateway via SMS by sending a PIN.
Configures GPRS and server parameters remotely via SMS.
Reports on the gateway's communication status, including signal strength and temperature.
Introduces the purpose and scope of the REST API documentation.
Lists the available methods for accessing the gateway via the HTTPS API.
Explains the JWT-based authentication process for API access.
Details the API method to retrieve current sensor status, voltage, and temperature.
Details the API method to retrieve the gateway's current voltage.
Explains the API method to get the gateway's current temperature.
Details the API method to delete all OMS entries from the gateway.
To Next Page
General