Sensus SensusRF - Protocol

39
SensusRF gateway user manual
| 29/10/2019
FIGURE 11-6 - NTP CONFIGURATION
11.2.2 Protocol
On the Protocol configuration web page, five features can be configured:
1. Enable or disable decryption;
2. Define a custom decryption Key;
3. Configure SensusRF device filter;
4. Enabled or disable SensusRF advanced filter
5. Configure OMS devices filter.
FIGURE 11-7 - PROTOCOL CONFIGURATION
Enable or disable decryption
The enable/disable decryption switch controls if the readings should be decrypted locally on the gateway
before delivering them.
Define a custom decryption Key