6
SensusRF gateway user manual
| 29/10/2019
1 Introduction
The SensusRF™ Integrated Gateway is responsible for integrating SensusRF or OMS Endpoints with an AMR
(automatic meter reading) system platform via a cellular network data connection. A network of Integrated
Gateways can be either managed by a centralized network management platform IRIS
1
, or utilize the inbuilt
webserver. The Gateway receives readings and alarms from meters and repeaters and transmits them to the
customers desired data store ready for billing. This can be as simple as an FTP server or email address, or can
be a more complicated API based solution. An individual Gateway can also be managed locally by its own
internal IRIS Light management system instead of the centralized IRIS server.
The SensusRF Gateway has an inbuilt webserver that can display and configure information about the
Gateway itself, perform the configurations of GPRS, Ethernet and IRIS Lite Server, verify Task Status, upgrade
firmware and verify radio information that is being collected.
The Gateway can send the information through GPRS using a SIM card or through the Internet using an
Ethernet cable. This document will describe the operation of SensusRF Integrated Gateway and a step-by-
step of configuration that must be executed on SensusRF Gateway webserver.
Warning: The power supply has live parts when switched on that may cause electric shock. A trained
professional must make the electrical installation.
Disposal: Some versions of this product may contain rechargeable batteries. In the interest of protecting the
environment, these batteries may not be disposed in household waste.
The local and national regulations for environmental protection are to be considered.
1
IRIS is a trademarks of CAS Tecnologia
To Next Page
Loading...
General