SensusRF gateway user manual
| 29/10/2019
FIGURE 11-9 - FTP PROFILE PAGE
The following fields must be configured:
• Server name
• Server port
• FTP Server Login information
• FTP security protocol
• Destination directory
Click the “Save” button to save configuration. To validate this configuration, click on Test button.
11.2.5 HTTP Profile
If the meter readings CSV file is to be sent by HTTP or HTTPS then the HTTP page must be configured
(“Upload” tab then “HTTP/HTTPS”).
FIGURE 11-10 – HTTP/HTTPS PAGE
To Next Page
Loading...
General