SensusRF gateway user manual
| 29/10/2019
The total number of registers (readings) stored in the Historical Reading database is defined by the field
“Configured Storage Limit”. This limit is related to the protocols supported by the gateway, both SensusRF
and OMS.
• If only SensusRF is enabled in the gateway, the historical readings database will support up to 310.000
registers.
• If OMS is enabled in the gateway, the historical readings database will support up to 155.000
registers.
• IMPORTANT: Changes on this configuration will reset the Historical Readings database.
FIGURE 11-21 – CONFIGURED STORAGE LIMIT
Based on the current gateway configuration, the Gateway web page will display how many days of Historical
Readings will be available in the gateway. In the Simulation Area, different configurations can be tested to
simulate how many days of Historical Readings the gateway will support, before changing the parameters.
FIGURE 11-22 – HISTORICAL READINGS SIMULATION
To Next Page
Loading...
General