5200 Multi Purpose and 5200 Multi Purpose HF Gas Analysers
05230001A / Revision 9
19
4.5 Scroll bars
On some screens (for example, see Figure 5), there may be more options available
than can be shown on the screen, and you have to scroll down the screen to view all
of the options: this is identified by a scroll bar at the right-hand side of the screen.
The height of the wide part of the scroll bar gives an indication of what proportion (of
all the options) are currently shown on the screen. As you scroll up or down the options
(using the and soft keys), the wide part of the scroll bar will also move on
the screen, indicating approximately where the currently displayed options are, within
the complete list of options. For example, compare the scroll bars in Figures 5 and 13.
4.6 Menu options/screens and password protection
The menu structure of the Multi Purpose is shown in Figure 4, which shows that some
of the options/screens are password protected.
When an option/screen is password protected, this means that the correct
corresponding password has to be entered before the option/screen can be accessed.
Password protection operates as follows:
• The first time you try to access a password-protected option/screen, you will be
prompted for the corresponding password. You must then enter the correct
password (using the editing method described in Section 4.10) before the option/
screen can be displayed.
• If you have already entered the corresponding password, you will gain access to all
options/screens protected by that password immediately (you do not need to enter
the password again).
+
Once you have entered a password, it remains active until 10 minutes after
the last soft key is pressed. After this, the password becomes inactive; you
must re-enter the password to access password-protected options/screens
again.
To Next Page
Loading...
Need help?
General
