5200 Multi Purpose and 5200 Multi Purpose HF Gas Analysers
05230001A / Revision 932
5.3.4 Selecting power save mode (Multi Purpose with optional rechargeable
battery)
If your Multi Purpose has the optional rechargeable battery, you can select the ‘power
save’ mode of operation, to conserve battery power. When power save mode is
selected, the Multi Purpose will automatically switch off after 30 minutes has elapsed
during which no key has been pressed.
To select/deselect power save mode:
1. With the Settings screen displayed, use the and soft keys to highlight
the "Power save" menu option, then press the soft key. The Power save
option screen will then be displayed, as shown in Figure 16.
Figure 16 - The Power save option screen
2. "No" or "Yes" on this screen identifies whether power save is selected or not. If
necessary, press the soft key to select the alternative setting, then press
the soft key.
+
Power save mode is automatically disabled when the Multi Purpose is
connected (through the power supply unit) to the electrical supply.
To Next Page
Loading...
