5200 Multi Purpose and 5200 Multi Purpose HF Gas Analysers
05230001A / Revision 946
6.5.5 Enabling/disabling the audible measurement alarm
1. With the Alarms option screen displayed (see Section 6.5.4), use the and
soft keys to highlight the "Audible alarm" option, then press the soft
key.
2. If the displayed alarm setting is not the required setting, press the soft key.
The Audible alarm option screen will then be displayed: see Figure 30.
Figure 30 - The Audible alarm option screen
3. Use the and soft keys to select the required option ("Yes" or "No"),
then press the soft key.
6.5.6 Silencing (muting) the audible measurement alarm
When the audible alarm is on because of a measurement alarm condition, you can
temporarily silence (mute) the audible alarm, as follows:
1. On the Measurement screen, press the soft key; the Alarm option screen
(Figure 27) will then be displayed.
2. With the "Mute" option highlighted, press the soft key. The audible alarm
will then go off and the Measurement screen will be displayed again.
+
The audible measurement alarm options are "Yes" (for enable) and "No" (for
disable).
+
The audible alarm will only go on when a measurement is made which
triggers a measurement alarm condition and the audible measurement
alarm has been enabled (see Section 6.5.5).
+
Once silenced, the audible alarm will go on again:
• If a new measurement alarm condition is activated.
• If the measurement alarm condition which caused the audible alarm to
go on is deactivated and is then re-activated.
You will then need to silence the audible measurement alarm again.
To Next Page
Loading...
Need help?
General
