5200 Multi Purpose and 5200 Multi Purpose HF Gas Analysers
05230001A / Revision 9
31
5.3.3 Changing regional settings
You can configure the following Multi Purpose regional settings so that the information
shown on the various screens is better suited to your local conventions:
To change the regional settings:
1. With the Settings screen displayed, use the and soft keys to highlight
the "Regional" menu option, then press the soft key. The first Regional
settings option screen will then be displayed, as shown in Figure 15.
Figure 15 - The Regional settings (language) option screen
2. This screen shows the first regional option (Language). If necessary, press the
soft key, use the and soft keys to highlight the required display
language, then press the soft key.
3. If required, for each of the other two selectable options (date format and decimal
format):
• Use the and soft keys to select the corresponding option screen.
• Press the soft key.
• Use the and soft keys to highlight the required option, then press
the soft key.
Setting Options available
Language Various languages are supported.
Date format Day/Month/Year * or Month/Day/Year.
Decimal format Use of "." (full stop) or "," (comma) as
the decimal point.
* Default option.
To Next Page
Loading...
Need help?
General
