Servomex SERVOFLEX MiniMP User Manual

5200 Multi Purpose and 5200 Multi Purpose HF Gas Analysers
05230001A / Revision 9ii
5.3.5 Selecting pump operation (Multi Purpose HF or standard
Multi Purpose with optional internal sample pump) . . . . . . . . . . . . 33
6 GENERAL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6.1 Calibrating the Multi Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6.2 Taking sample readings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
6.3 Correcting oxygen measurement for different background gases . 39
6.3.1 Overview of measurement errors . . . . . . . . . . . . . . . . . . . . . . . . . 39
6.3.2 Entering a cross-interference compensation . . . . . . . . . . . . . . . . . 39
6.4 Selecting display units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6.5 Configuring the measurement alarms . . . . . . . . . . . . . . . . . . . . . . 43
6.5.1 Alarm modes and levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6.5.2 Latching/non-latching alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6.5.3 Hysteresis levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.5.4 Setting the measurement alarm levels and modes . . . . . . . . . . . . 45
6.5.5 Enabling/disabling the audible measurement alarm . . . . . . . . . . . 46
6.5.6 Silencing (muting) the audible measurement alarm . . . . . . . . . . . 46
6.5.7 Unlatching measurement alarms . . . . . . . . . . . . . . . . . . . . . . . . . . 47
6.5.8 Viewing the measurement alarm status. . . . . . . . . . . . . . . . . . . . . 47
6.6 Configuring and using the milliAmp outputs (optional feature) . . . 48
6.6.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
6.6.2 Introduction to the milliAmp output parameters . . . . . . . . . . . . . . . 49
6.6.3 Set up the milliAmp output parameters . . . . . . . . . . . . . . . . . . . . . 50
6.6.4 Select the Range associated with a measurement . . . . . . . . . . . . 51
6.6.5 Calibrate a milliAmp output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.6.6 Check a milliAmp output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.7 Data logging, serial outputs and printed outputs . . . . . . . . . . . . . . 54
6.7.1 Selecting data logging/serial output/printed outputs . . . . . . . . . . . 54
6.7.2 Configuring the serial output parameters. . . . . . . . . . . . . . . . . . . . 55
6.7.3 Introduction to data logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
6.7.4 Entering measurement data into the data log . . . . . . . . . . . . . . . . 56
6.7.5 Starting a new data log batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
6.7.6 Outputting the data log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
6.7.7 Viewing the data log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
6.7.8 Clearing the data log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
6.7.9 Printing a sample measurement report . . . . . . . . . . . . . . . . . . . . . 59
6.8 Adjusting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
6.8.1 Adjusting the backlight timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
6.8.2 Adjusting the contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
6.9 Switching off the Multi Purpose after use . . . . . . . . . . . . . . . . . . . 60
7 ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
7.1 Cleaning the Multi Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
7.2 Inspecting the inlet filter element . . . . . . . . . . . . . . . . . . . . . . . . . . 61
7.3 Regenerate/replace the drying agent . . . . . . . . . . . . . . . . . . . . . . 62
7.4 Use of the Multi Purpose for carbon monoxide measurements. . . 63
7.5 Preventative maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
CONTENTS (CONTINUED)
Section Page

Servomex SERVOFLEX MiniMP Specifications

General

Brand	Servomex
Model	SERVOFLEX MiniMP
Category	Measuring Instruments
Language	English