5200 Multi Purpose and 5200 Multi Purpose HF Gas Analysers
05230001A / Revision 980
<alarm> Specifies the alarm or other status:
• "Pass" indicates that alarms have been configured, and
that the sample measurement has not triggered an alarm.
• "FAIL" indicates that alarms have been configured, and
that the sample measurement has triggered an alarm.
• "FAULT" indicates that a transducer fault is present.
• "RECALIB" indicates that the transducer needs to be
recalibrated. (This will be shown when the sample
measurement is >100% or < 0% and no alarms have been
configured.)
If no alarms have been configured (and no transducer or
recalibration fault is present), <alarm> will be blank.
Batch and
Product
Are fields which you can complete (by hand) to identify, for
example, a specific batch, and a specific product within that
batch.
Signature Is a field which can be used for the signature of the person
who printed the report.
+
Refer to your company procedures for the correct usage of the Batch,
Product and Signature fields of printed sample measurement reports.
+
Refer to the printer manual for additional information (for example, on how to
replace the printer roll).
To Next Page
Loading...
Need help?
General
