9
Inspection and maintenance
Inspection and maintenance work
Operating Instructions – MOVIMOT
®
advanced
214
3. NOTICE!Loss of the guaranteed degree of protection. Possible damage to prop-
erty. Make sure not to damage the sealing surfaces when removing the gasket.
Loosen the used gasket by levering it off the retaining cams.
ð Doing so will be easier if you adhere to the sequence shown in the figure be-
low.
9007228451980555
4. Remove the old gasket completely from the connection box.
9007228456898187
25891936/EN – 05/2020