SEW-Eurodrive MOVIMOT advanced DRN DBC Series User Manual

9
Inspection and maintenance
Inspection and maintenance work
Operating Instructions – MOVIMOT
®
advanced
216
7. Check the installation and startup of the drive unit using the applicable operating
instructions.
8. Place the electronics cover on the connection box again and fasten it.
ð Proceed as follows when installing the electronics cover: Insert the screws and
tighten them in diametrically opposite sequence step by step with a tightening
torque of 6.0 Nm.
32170761355
25891936/EN – 05/2020

SEW-Eurodrive MOVIMOT advanced DRN DBC Series Specifications

General

Brand	SEW-Eurodrive
Model	MOVIMOT advanced DRN DBC Series
Category	DC Drives
Language	English