12
Functional safety
Safety conditions
Operating Instructions – MOVIMOT
®
advanced
289
12.3.4 Requirements on startup
• To validate the implemented drive safety functions, they must be documented and
checked after successful startup.
• Observe the restrictions for drive safety functions in chapter "Restrictions" for the
validation of the safety functions. Non-safety-related parts and components that af-
fect the result of the test (e.g. motor brake) must be deactivated, if necessary.
• For using the drive unit in safety-relevant applications, it is essential that you per-
form and record startup checks for the disconnecting device and correct wiring.
25891936/EN – 05/2020
To Next Page
Loading...
Need help?
General
