6
Startup
Startup requirements
Operating Instructions – MOVIMOT
®
advanced
99
In this case, the following conditions apply to startup:
• You have installed the device correctly both mechanically and electrically.
• You have performed a correct project planning for the device.
• Safety measures prevent accidental startup of devices.
• Safety measures prevent danger to persons or machines.
Required hardware components:
• PC or laptop as specified in chapter "PC connection".
• Interface cable and, if necessary, interface adapter according to chapter "PC con-
nection".
Required software:
• Engineering software MOVISUITE
®
standard by SEW‑EURODRIVE.
6.2.1 Torque limiting
NOTICE
Gear unit overloaded by the motor.
Possible damage to property.
• The maximum output torque might have to be limited to the torque specified on
the nameplate.
Also observe the information in the catalog "MOVIMOT
®
advanced Gearmotors"
25891936/EN – 05/2020
To Next Page
Loading...
Need help?
General
