SEW DRC2 - Page 112

112
Operating Instructions – Electronic Motor DRC.-..-SNI
8
Description of application option parameters
Parameters
Index 10453.12,
bit 1 binary inputs
activated
The parameter indicates the setting of DIP switch S1/2 of the application option.
Index 10453.12,
bit 2 analog output
activated
The parameter indicates the setting of DIP switch S1/3 of the application option.
Index 10453.12,
bit 3 binary output
activated
The parameter indicates the setting of DIP switch S1/4 of the application option.
DIP switch S2
Index 10453.12,
bit 4 master
frequency input
activated
The parameter indicates the setting of DIP switch S2/1 of the application option.
Index 10453.12,
bits 5 to 7
limit frequency of
master frequency
input
The parameter indicates the setting of DIP switches S2/1 to S2/4 of the application
option.
DIP switch S3
Index 10453.12,
bit 8 master
frequency input
A/B mode
The parameter indicates the setting of DIP switch S3/1 of the application option.
Index 10453.12,
bit 9
IPOS: Download +
start
The parameter indicates the setting of DIP switch S3/2 of the application option.
Index 10453.12,
bit 10 analog input:
Voltage mode
The parameter indicates the setting of DIP switch S3/3 of the application option.
00
I