74
Operating Instructions – Electronic Motor DRC.-..-SNI
6
Lifting applications
Startup
6.2 Lifting applications
6.3 Prerequisties for startup
The following conditions apply to startup:
• Correct project planning for the DRC drive unit. For project planning notes, refer to
the catalog.
• The DRC drive unit must be installed correctly both mechanically and electrically.
• Appropriate safety measures prevent the drives from starting up unintentionally.
• Appropriate safety measures must be taken to prevent risk of injury or damage to the
machine.
INFORMATION
• To ensure fault-free operation, do not disconnect or connect signal cables during
operation.
WARNING
Risk of fatal injury if the hoist falls.
Severe or fatal injuries.
• The DRC drive unit is not designed for use as a safety device in lifting applications.
• Use monitoring systems and mechanical protection devices to ensure safety.
To Next Page
Loading...
