SEW DRC2 - Example Nameplate and Type Designation of Electronics

Operating Instructions – Electronic Motor DRC.-..-SNI
19
3
Example nameplate and type designation of electronics
Unit Structure
3.6 Example nameplate and type designation of electronics
3.6.1 Nameplate
The following figure gives an example of a DRC nameplate. For the structure of the type
designation, refer to chapter "Type designation".
3.6.2 Type designation electronics cover
The following table shows the type designation of the electronics cover:
4766392075
[1] Nameplate of connection unit
[2] Nameplate of application option
[3] Nameplate of electronics cover
[1]
[3]
[2][1]
[3]
[2]
D R C 1–5 0 3–SNI–A – 00 – A
Electronics cover variant
0 = Without application slot
A = With application slot
Variant
00 = Standard
DRC version
DRC installation technology
SNI = S
ingle Line Network Installation
Connection type
3 = 3-phase (AC)
Supply voltage
50 = AC 380 – 500 V
Size
1
2
=
=
DRC 1
DRC 2
Product line
DRC = Electronic motor