SEW DRC2 - ASEPTIC; ASEPTICplus Variants

178
Operating Instructions – Electronic Motor DRC.-..-SNI
12
ASEPTIC / ASEPTICplus variants
Technical Data and Dimension Sheets
12.5 ASEPTIC / ASEPTIC
plus
variants
12.5.1 Surface protection
The properties of OS2 – OS4 in connection with ASEPTIC variants or OS4 in connection
with ASEPTIC
plus
variants are listed in chapter "Surface protection".
12.5.2 Cleaning
Do not mix cleaning and disinfecting agents under any circumstances.
Never mix acids and chloralkalis, as poisonous chlorine gas will result.
Strictly observe the safety instructions of the cleaning agent manufacturer.
12.5.3 Sealing material
Resistance to
cleaning agents
The sealing material used in DRC motors has been tested for resistance to cleaning
agents.
Resistance to the following cleaning agents was proven in the tests performed by the
company ECOLAB
®
:
Alkaline and chlorinated alkaline foam cleaning agents
Designation Application
concentration
Application
temperature
P3-topax 12 5% 40 °C
Acid foam cleaning agents
Designation Application
concentration
Application
temperature
P3-topax 56 5% 40 °C
P3-topax 58 5% 40 °C
TFC cleaner
Designation Application
concentration
Application
temperature
P3-topactive 200 4% 40 °C
P3-topactive 500 4% 40 °C
Disinfectant
Designation Application
concentration
Application
temperature
P3-topax 990 5% 23 °C
DI water – 40 °C
Product specifications:
P3-topax 19 Alkaline foam cleaning agent
P3-topax 56 Acid foam cleaning agent based on phosphoric acid
P3-topax 58 Acid foam cleaning agent based on organic acids
P3-topactive 200 Alkaline cleaning agent for operational cleaning as TFC application
P3-topactive 500 Acid cleaning agent for operational cleaning as TFC application
P3-topax 990 Alkaline foam disinfectant based on alkylamine acetate
DI water Demineralized water
P
i
f
kVA
Hz
n