28
Operating Instructions – Electronic Motor DRC.-..-SNI
4
Application options
Mechanical Installation
4.5 Application options
4.5.1 Removing the application cover
DRC drive units with application slot in the electronics cover are delivered with an appli-
cation cover as standard.
You have to remove the application cover in order to install an application option:
1. Loosen the 4 retaining screws.
2. Remove the application cover.
WARNING
Burns caused by hot surfaces.
Severe injuries.
• Let the units cool down before touching them.
18014400859806987
18014400859827339
NET
RUN
DRIVE
To Next Page
Loading...
