22
DVD OUT
AV 2 OUT
DIGITAL
AUDIO
AUDIO
R
L
S-VIDEO
DVD/VCR
AV 1 OUT
AUDIO
R
L
VIDEO
VCR
AV 1 IN
AUDIO
R
L
(
MONO
)
VIDEO
IN FROM
ANTENNA
UHF/VHF
CATV
OUT TO TV
OUTPUT
CHANNEL
34
OUTIN
ANT/CABLE
From
CATV
system
A
B
Cable Box
TV Rear
Unit’s Rear
Coaxial cables
(Not supplied)
A/B switch
(Not supplied)
Coaxial cable
(Supplied)
Coaxial cables
(Not supplied)
Splitter
(Not
supplied)
Cable TV Connections
Connection with cable box, A/B switch and splitter
By using an A/B switch or splitter, it is possible to switch between the cable box and the Unit output.
For example, while recording a TV program with the Unit, it is possible to watch a CATV program (including
descrambled programs) using the A/B switch.
• Connect as shown below.
Using the A/B Switch
1 Set the A/B switch to the “A” position in the following situations.
• To watch a cable TV program while recording another program.
• To watch a scrambled cable TV program.
• To watch a cable TV program when the Unit is turned off.
• Use the cable box to change channels.
• If you turn off the cable box, you cannot watch a CATV program.
2 Set the A/B switch to the “B” position in the following situations.
• To play back a cassette on the Unit.
• To watch a program which is being recorded with the Unit tuner.
• To watch a program using the Unit tuner.
After the Connection
Plug in the power cord of the TV. Then go to EZ Set Up (See page 26).
To Next Page
Loading...
