57
Sharp Super Picture
This function creates clearer picture quality only during playback.
1 Press VCR MENU to display the menu screen.
2 Select “SET UP” with ' / " and then press SET.
SET UP
MENU
ENTER :SET EXIT :MENU
CHANNEL PRESET
SELECT :
CLOCK
LANGUAGE
TIMER
3 Select “S. PICTURE” with ' / ". Then set it to “ON” or “OFF”
with
\\
\\
\ /
||
||
|.
SELECT : CHANGE:
BLUE SCREEN ON OFF
AUTO REPEAT ON OFF
ENTER :SET EXIT :MENU
AUDIO OUTPUT
SAP ON
OFF
MONO LR L R
EXACT REC ON OFF
S. PICTURE ON
OFF
ON:
Normally leave the mode set to ON. This high picture quality
function will create a clearer image during playback.
OFF:
Set to OFF when playing back a tape on the VCR while editing
or when strong noise appears on the screen.
4 Press SET to enter.
• The screen return to normal.
• This function only operates during playback. It will not operate when
recording or watching a TV program with the VCR tuner.
• When playing S-VHS tape
1. Sharp Super Picture is set to off automatically. When finished play-
back, the setting will return to the previous setting.
2. You cannot change ON/OFF setting manually.
• The ON/OFF status of the Sharp Super Picture can be checked when
ON SCREEN is pressed to display OSD.
• When the Unit power is turned off, the Sharp Super Picture setting is
retained in memory.
• If power is interrupted for more than 60 seconds (power failure, etc.),
the setting will return to ON.
To Next Page
Loading...
