Sharp DV-NC55U

98
Repeat Playback
100
OPEN/
CLOSE
POWER
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
TV /VCR EJECT
FUNCTION
CONTROL
PROGRAM ZOOM
CANCEL
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
VCR DVDAM/PM INPUT
PAUSE/STILL
REC
VCR/ DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
STOP
PLAY
DVD MENU
REPEAT
TITLE
DVD
DVD
DVD
A
B
C D
C D
C D
C D
A-B Repeat
A-B repeat allows you to repeat specified section on the disc.
1 Press (REPEAT) three times while a disc is playing.
2 While you are playing a disc, press ûPLAY when you reach the
start of the section to be repeated.
3 While the disc is playing the same title (same chapter/track),
press ûPLAY again when you reach the end of the section to
be repeated.
• The A-B repeat begins from the point where you specified in
step 1.
• Press
(REPEAT) to turn off the “ ” indicator when returning
to regular playback.
• To cancel A-B repeat, press
ËË
ËË
Ë STOP, TITLE or DVD MENU.
• A-B repeat can only be used within the same title/track.
(On some DVD discs, A-B repeat is restricted to the same chapter.)
If the start and end of the section to be repeated are in different titles/
chapters/tracks, A-B repeat is cancelled.
• If the DVD Front Panel display does not show the elapsed playback time
while a disc is playing, A-B repeat playback cannot be used for that disc.
• The A-B repeat function does not operate in scenes where different
camera angles are recorded.
Track Repeat/Disc Repeat
Example: To repeat play a track.
1 While a disc is playing, press (REPEAT) and then press
ûû
ûû
ûPLAY.
• The track currently playing is played repeatedly.
• To perform disc repeat playback, press (REPEAT) twice.
• Press
(REPEAT) to turn off the “ ” indicator when returning
to regular playback.
• Repeat playback is disabled on some discs.
• Repeat playback cannot be used during programmed playback.
CD
CD