90
VIRTUAL DOLBY (QSURROUND) setting
This function allows you to enjoy a “surround sound” effect when you
are using an analog connection (using AV1 OUT on this Unit) to 2-
channel audio equipment (TV, etc.).
Preparation
To use the VIRTUAL DOLBY (QSURROUND) function
• Set the “COMPRESSION” setting in “AUDIO SETUP” to “OFF” (see
page 44).
Refer to the table below about the types of audio format with which
VIRTUAL DOLBY (QSURROUND) works.
1 Press FUNCTION CONTROL during playback.
• The Function control screen appears.
2/5
8/3‰
‰1:3‰:‰8
2
ENGLISH
1
1
5 1ch
ON
ON
ON
.
DVD
2 Use ' or " to select and then press ENTER.
ON
DVD
3 Press ' or " to toggle VIRTUAL DOLBY between “ON” and
“OFF”.
4 While “ON” is selected, use \ or | to change the level setting.
ON
DVD
5 Press ENTER to confirm the setting.
• You can exit the Function control screen by pressing
RETURN or FUNCTION CONTROL.
100
OPEN/
CLOSE
POWER
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
TV /VCR EJECT
FUNCTION
CONTROL
PROGRAM ZOOM
CANCEL
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
VCR DVDAM/PM INPUT
PAUSE/STILL
REC
VCR/ DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ENTER
RETURN
FUNCTION
CONTROL
About the Function Control Screen
Dolby
Digital
Types of audio recorded on the disc
✕✕——
Dolby Digital
2ch/Linear
PCM
Dolby
Pro Logic
DTS
• VIRTUAL DOLBY (QSURROUND) does
not operate on Audio CDs.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you set the
“COMPRESSION” setting in “AUDIO
SETUP” to “ON”.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you are using a Digital
connection.
• QSURROUND™ is a trademark of
QSound Labs, Inc.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you play back a disc
recorded using Linear PCM or DTS
format.
To Next Page
Loading...
