Adding Channel Memory/Erasing Channel
Memory
Use this function to manually add or erase channels to/from the
memory.
1 Select the channel to be added with the number buttons and the
channel to be erased with the CH ' / " or number buttons.
2 Press VCR MENU. Select “CHANNEL PRESET” with ' / " and
press SET.
SET UP
MENU
ENTER :SET EXIT :MENU
CHANNEL PRESET
SELECT :
CLOCK
LANGUAGE
TIMER
3 Select “CH SET” with ' / " and then select “MANUAL” with
\\
\\
\ /
||
||
|. Then press SET.
AIR/CATV AIR CATV
CHANNEL PRESET
CH SET AUTO MANUAL
4 Select “ADD” if you want to add the channel memory or
“ERASE” if you want to erase the channel memory with
\\
\\
\ /
||
||
|.
[ADD] [ERASE]
ADD 03
ERASE 03
5 Press VCR MENU to return to the normal screen.
• If the power is interrupted for more than 60 seconds, the channel
memory may be erased. If this happens, reset the channels again and
reset AIR/CATV selection.
• If a button is not pressed within 3 minutes during the setting proce-
dure, the screen will return to normal.
VCR Setup
\\
\\
\ /
||
||
|
To Next Page
Loading...
