Sharp DV-NC55U

78
The following steps are necessary to display the DVD screen on the
TV.
When connecting the unit and the TV using
the DVD output jack
TV
Turn on the TV and switch the TV channel to the external input
“VIDEO” or “AV” channel connected to DVD output jack.
This Unit
1 Press POWER.
• The start up screen is displayed on the TV screen.
2 Move VCR/DVD CHANGE Switch on the remote control to
DVD.
When connecting the unit and the TV using
only the DVD/VCR shared output jack
TV
Turn on the TV and switch the TV channel to the external input
“VIDEO” or “AV” channel connected to DVD/VCR shared output jack.
This Unit
1 Press POWER.
2 Move VCR/DVD CHANGE Switch on the remote control to
DVD.
3 Press VCR/DVD SELECTOR to enter the DVD mode.
•
The DVD Output indicator will light up and the start up screen
will be displayed on the TV screen.
Preparing to Use DVD
100
OPEN/
CLOSE
POWER
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
TV /VCR EJECT
FUNCTION
CONTROL
PROGRAM ZOOM
CANCEL
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
VCR DVDAM/PM INPUT
PAUSE/STILL
REC
VCR/ DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
POWER
VCR/DVD
SELECTOR
VCR/DVD
CHANGE
Switch
PLAYREW PLAY STOP
VCR / DVD COMBINATION
OPEN/
CLOSE
VCR DVD
(AV 1 )
EJECT/STOPPOWER
STANDBY
CH(TRACKING)
L(MONO)-AUDIO-RAV 2 IN VDEO
POWER
DVD Output
indicator