59
This function automatically forwards or rewinds the cassette to the
“0:00.00” point. Use this function to return to a recording start point.
1 Reset the counter to “0:00.00” with CANCEL before recording.
2 Press
ÆÆ
ÆÆ
ÆREC to start recording.
3 After recording the desired program, press ËSTOP to stop
recording.
4 Press ZERO BACK to return to the recording start point
(0:00.00).
• During auto zero back, if the VCR rewinds (or fast forwards) the tape
all the way without finding the “0:00.00” point, it will stop at the
beginning (or end) of the tape.
• The counter start point “0:00.00” may differ slightly from the starting
point on the tape.
• This function is not operable during recording, recording pause,
simple recording timer or timer recording.
Auto Zero Back
To Next Page
Loading...
