44
DVD Setup
AUDIO Setting
COMPRESSION ............ Use this setting for increasing the average
volume of Dolby Digital audio when playing a
DVD.
DIGITAL .................. Use this setting for specifying the type of
digital output when playing a disc recorded
using Dolby Digital.
Setting the COMPRESSION
(Dolby Digital output level)
When Dolby Digital is used to record the audio on a DVD disc, the
average overall volume level of the audio is relatively lower than that
produced by an audio CD. This is to provide the widest possible
dynamic range. To counteract this, this Unit automatically raises the
overall average volume level of a disc recorded using Dolby Digital to a
level that is similar to that of an audio CD.
• OFF.............. Audio level recorded on disc is played back without
modification.
• ON ............... Dolby Digital average audio level is increased so it
sounds similar to that of an audio CD.
Preparation
• See Watching DVD on page 28.
1 Press DVD SETUP to display the SETUP screen.
2 Use ' or " to select the “ AUDIO SETUP”.
AUDIO SETUP
COMPRESSION: OFF
DIGITAL:
BITSTREAM
100
OPEN/
CLOSE
POWER
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
TV/VCR EJECT
FUNCTION
CONTROL
PROGRAM ZOOM
CANCEL
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
VCR DVDAM/PM INPUT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
DVD SETUP
DVD
Dolby Digital audio
COMPRESSION:
OFF
COMPRESSION:
ON
• Low audio level
Audio CDs
•
Audio level the same
as audio CD, etc.
To Next Page
Loading...
